XK100
Keyboard Amplifier
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
XK100 Keyboard Amplifier
Declaration of Conformity
Manufacturer’s Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500, UL60065, or UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175
CAUTION
PRECAUCION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIESGO DE CORRIENTAZO
NO ABRA
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS
O
DESCARGAS
LA
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO
A
LLUVIA
O
LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
IMPORTANT SAFETY INSTRUCTIONS
• READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
• DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR
PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR
FLOW PROVISIONS IN THE CABINET.
• DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
• CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
• ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
• PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
• UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
• ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR
SAFE OPERATION AND TO AVOID INJURY.
• WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
• SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
• OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PRO-
TECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
Download from Www.Somanuals.com. All Manuals Search And Download.
XK100 Keyboard Amplifier
Congratulations!
You are now the proud owner of the Crate XK100 keyboard amplifier. This ver-
satile and great sounding amp features a 15” Crate Custom woofer and two LeSon
dome tweeters housed in a ported tuned enclosure. Each of the four discreet chan-
nels has its own level and reverb/effect control. Channel 1 also has separate low and
high rotary EQ controls, switchable phantom power, and a balanced low impedance
mic in jack. The master section features a 5-band graphic equalizer, a balanced line
out jack with level control, and CD input jacks which allow you to play along with your
favorite music. External effects may be patched into the amplifier by means of the
Send and Return jacks, and headphones may be connected for personal monitoring
as well as private practice sessions.
The XK100 ’s angled cabinet allows you to use it as an upward projecting floor
monitor or stand it upright like a conventional amplifier.
Like all Crate products, your XK100 is designed by musicians, and built using
only the best components. Extensive testing at the hands (and ears) of skilled tech-
nicians and musicians insures you that this amplifier is the absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge you to go over
the information contained in this manual before you begin playing.
And thank you for choosing
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XK100 Keyboard Amplifier
5
3
8
5
3
5
3
5
3
4
4
4
4
7
2
6
1
9
9
9
1. MIC IN: Use this balanced XLR jack to connect a low impedance balanced microphone signal to
Channel 1 of the amplifier by means of a shielded microphone cable.
2. LINE IN: Use this balanced 1/4” jack to connect a high impedance microphone or other line level
signal to Channel 1 of the amplifier by means of a shielded microphone or instrument cable.
NOTE: Both the Mic In and Line In jacks may used simultaneously, however both of their lev-
els are controlled by the Channel 1 Level control (#3).
3. LEVEL: Use this control to adjust the level of the signal connected to the corresponding channel’s
input jack.
4. PEAK: This LED illuminates when the corresponding channel’s input signal level nears clipping. For
the best signal to noise ratio, adjust the channel’s Level control until this LED flashes on strong signal
peaks.
5. REV/EFF: Use this control to adjust the amount of reverberation applied to the signal at the corre-
sponding input jack.
6. PHANTOM POWER: This switch, when depressed, applies 15 volts of phantom power to the Mic
In jack. Engage this switch when using microphones which require phantom power.
7. LOW: Use this control to adjust the low frequency level of the Channel 1 signal. Rotating the con-
trol counterclockwise reduces the low frequency output. Rotating the control clockwise increases the
low frequency output.
8. HIGH: Use this control to adjust the high frequency level of the Channel 1 signal. Rotating the con-
trol counterclockwise reduces the high frequency output. Rotating the control clockwise increases the
high frequency output.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|