Download from Www.Somanuals.com. All Manuals Search And Download.
BV412RVB/SVB Guitar Enclosure
Your Crate BV412RVB/SVB 4x12 Guitar Cabinet is built from
the finest materials and components available. The cabinet is
carefully constructed from 13 ply Baltic Birch and covered with
extremely tough Tolex®. The cabinet is then loaded with four
Celestion Vintage 30 speakers.
The BV412RVB/SVB comes standard with casters, steel han-
dles, a heavy duty metal grille for ultimate speaker protection,
and a switchable, dual-impedance mono/stereo jackplate. The
BV412RVB features a straight baffle while the BV412SVB fea-
tures a slanted top baffle.
The BV412RVB/SVB also comes with a 14 gauge speaker
cable to help insure maximum power and full frequency response
from your new cabinet.
For those wishing to use multiple cabinets, the BV412RVB has
caster cups on its top surface to accomodate the casters of a
second cabinet, stacked on top.
IMPORTANT SAFETY INSTRUCTIONS:
1.Read, follow and keep these instructions. Heed all warnings.
2.This speaker is capable of producing high sound pressure levels that may cause
permanent hearing damage. User caution is advised and ear protection is recom-
mended during use.
3.This speaker is designed for use on a sturdy, level surface. Whenever stacking
speaker cabinets, do not stack more than two high. Only speaker cabinets which
are equipped with caster cups on their top surfaces are to be used underneath a
cabinet which is equipped with casters.
4.Speaker cables are a tripping hazard and must be routed out of traffic areas and
away from any possible accidental contact.
5.Do not expose this speaker to rain or moisture. Do not place liquid filled contain-
ers on this speaker. Clean only with a damp cloth.
6.Repair or service of this speaker should be performed only by qualified personnel.
Download from Www.Somanuals.com. All Manuals Search And Download.
BV412RVB/SVB Guitar Enclosure
The Input/Output Plate:
(1) Impedance Selector Switch:
Use this switch to select 16 ohm
mono operation or 8 ohm stereo/4
ohm mono operation.
3
4
2
1
(2) Out 1/4” Jack: When using the
cabinet in the mono operating
mode, use this jack to connect the
cabinet to another speaker enclo-
sure of the same impedance.
4 Ohm Mono Configuration:
OUT
Mono Amplifier
(3) In/Left 1/4” Jack: When using
the cabinet in the mono operating
mode, use this jack as the cabinet’s
input jack. Connect the output of
your amplifier to this jack by means
of the 14 gauge speaker cable pro-
vided.
16 OHM
4 OHM
OUT
IN
BV412RVB/SVB
Input plate
16 OHMS 4 OHMS
MONO
MONO
8 OHMS
STEREO
LEFT
RIGHT
RIGHT
RIGHT
When using the cabinet in the
stereo operating mode, connect this
jack to the left channel output of
your amplifier.
16 Ohm Mono Configuration:
OUT
Mono Amplifier
16 OHM
4 OHM
(4) Right 1/4” Jack: When using
the cabinet in the stereo operating
mode, connect this jack to the right
channel output of your amplifier.
OUT
IN
BV412RVB/SVB
Input plate
16 OHMS 4 OHMS
MONO
MONO
When using the cabinet in the mono
operating mode, this jack is not
used.
8 OHMS
STEREO
LEFT
8 Ohm Stereo Configuration:
LEFT OUT
RIGHT OUT
Stereo Amplifier
Refer to the illustrations to the
right for additional information.
OUT
IN
BV215RVD
Input plate
16 OHMS 4 OHMS
MONO
MONO
8 OHMS
STEREO
LEFT
Download from Www.Somanuals.com. All Manuals Search And Download.
BV412RVB/SVB Guitar Enclosure
Technical Specifications:
Impedance
4 or 16 ohms Mono, 8 ohms Stereo
240 watts Mono, 120 watts Stereo
480 watts Mono, 240 watts Stereo
70Hz – 5kHz
RMS Power Rating
Peak Power Handling
Frequency Response
Sensitivity
100dB SPL 1 watt/1 meter
Maximum SPL
Transducers
120dB
(4) Celestion 12” 16 ohm Vintage 30 speakers
(3) 1/4” jacks: Mono In/Out, Stereo Left and Right
31-1/2” x 30” x 14”
Full Range Inputs
Dimensions (H x W x D)
Weight
BV412SVB: 106 lbs; BV412RVB: 110 lbs
Specifications subject to change without notice.
©2002 SLM Electronics, Inc. • A Division of St. Louis Music, Inc.
1400 Ferguson Avenue • St. Louis, MO 63133
47-633-04 • 121102
Download from Www.Somanuals.com. All Manuals Search And Download.
|