Crate Amplifiers Musical Instrument Amplifier GFX 120T User Manual |
GFX-212T
GFX-120T
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
Congratulations!
You are now the proud owner of the Crate GFX-120T/212T amplifier. This rugged amplifier
combines outstanding features with serious clean and distorted sounds. An easy to operate DSP
section lets you dial in a variety of digital effects including reverbs, delays, octave and wah-wahs –
with a separate level control. Crate’s unique Channel Tracking feature means that as you switch
between channels and gains, the DSP automatically “tracks” the changes - your DSP settings for
each channel are stored and automatically recalled! The supplied three-button footswitch allows
you to select channels, change the overdrive gain, and turn the DSP on and off by “remote control.”
The top-mounted electronic tuner lets you get tuned and stay in tune any time the amplifier is on.
Like all Crate products, your GFX-120T/212T is designed by musicians, and built using only
the best components. Extensive testing confirms that this amplifier is the absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge you to read the informa-
tion contained in this manual before you begin playing.
And thank you for choosing
TABLE OF CONTENTS:
The Digital Signal Processor . . . . . . . . . . . . . . . . . . . . .3
Channel Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
The Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Suggested Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . .7
Technical Specifications . . . . . . . . . . . . . . . . .back cover
CAUTION
PRECAUCION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIESGO DE CORRIENTAZO
NO ABRA
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS
O
DESCARGAS
LA
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO
A
LLUVIA
O
LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
IMPORTANT SAFETY INSTRUCTIONS
• READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
• DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR
PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR
FLOW PROVISIONS IN THE CABINET.
• DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
• CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
• ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
• PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
• UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
• ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR
SAFE OPERATION AND TO AVOID INJURY.
• WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE..
• SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
• OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PRO-
TECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
The Digital Signal Processor:
Crate’s Digital Signal Processing offers 16 exciting digital effects, accessible through the DSP
Mode control. The effects are described below.
1
2
REV 1
REV 2
REV 3
REV 4
DLY 1
DLY 2
DLY 3
small room reverb
medium room reverb
3
large room reverb
4
concert hall reverb
5
short slapback + small room reverb
medium delay + plate reverb
long delay + large room reverb
6
7
8
FLNG 1 slow deep flange + reverb
FLNG 2 flange + reverb + delay
CHO 1 slow tremolo chorus + reverb
CHO 2 chorus + reverb + delay
9
10
11
12
RTRY
simulated rotating speaker effect
13 OCTV DN adds a signal one octave lower than input
14
15
16
T-WAH touch sensitive wah-wah effect
I-WAH
DBLR
inverse wah-wah effect
simulated second track, slightly out-of-sync
Channel Tracking:
Your Crate GFX-120T/212T gives you the power of Channel Tracking! Once you select a DSP
setting for each channel, Channel Tracking recalls those DSP settings automatically – without
changing the DSP controls! For example:
• Select the Clean channel. Set the DSP Mode to “FLNG 1” (slow deep flange + reverb)
• Select the Overdrive channel, Gain 1. Set the DSP Mode to “CHO 1” (slow tremolo chorus + reverb)
(the setting for the Clean channel is now saved to memory)
• Select the Overdrive channel, Gain 2. Set the DSP Mode to “T-WAH000” (touch sensitive wah-wah)
(the setting for the Overdrive channel, Gain 1 is now saved to memory)
• Reselect the Clean channel (the setting for the Overdrive channel, Gain 2 is now saved to memory)
Now when you go back to the Clean channel, even though the DSP Mode was last set to “T-WAH,”
Channel Tracking automatically recalls the last setting for the Clean channel – in this example,
“FLNG 1.” Change to the Overdrive channel, Gain 1, and “CHO 1” is recalled. Change to the
Overdrive channel, Gain 2, and “T-WAH” is recalled. That’s the power of Channel Tracking!
(Note: Even when the power is turned off, Channel Tracking still retains the settings – until you change them!)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
The Front Panel:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19
1: INPUT: Use this 1/4” jack to connect your guitar to the amplifier by means of a shielded instrument cable.
OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive.
2: GAIN 1: Use this control to adjust the amount of light distortion for the Overdrive channel. Gain 1 pro-
duces less intense distortion than Gain 2 (#3) and is active when the Gain switch (#5) is in the out position.
3: GAIN 2: Use this control to adjust the amount of heavy distortion for the Overdrive channel. Gain 2 pro-
duces more intense distortion than Gain 1 (#2) and is active when the Gain switch (#5) is depressed.
4: SHAPE: Use this control to “dial in” the tone for the Overdrive channel when Gain 2 is selected. Rotating
the control counterclockwise enhances the mid frequencies, while rotating the control clockwise enhances
the low and high frequencies. This control is active only when Gain 2 is selected.
5: GAIN SELECT: Use this switch to select which gain control is active for the Overdrive channel. With the
switch in the out position, Gain 1 is selected. When the switch is depressed, Gain 2 is selected.
6: LOW: Use this control to adjust the low frequency level of the Overdrive channel.
7: HIGH: Use this control to adjust the high frequency level of the Overdrive channel.
8: LEVEL: Use this control to adjust the output level of the Overdrive channel.
9: CHANNEL SWITCH: Use this switch to select either channel. With the switch in the out position, the
Clean channel is selected. When the switch is depressed, the Overdrive channel is selected.
CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion.
10: LEVEL: Use this control to adjust the output level of the Clean channel.
11: LOW: Use this control to adjust the low frequency level of the Clean channel.
12: MID: Use this control to adjust the midrange frequency level of the Clean channel.
13: HIGH: Use this control to adjust the high frequency level of the Clean channel.
14: DSP LEVEL: Use this control to adjust the amount of digital effect: in its fully counterclockwise posi-
tion the signal will be “dry” (without any effect). As you rotate the control clockwise the amount of effect
increases.
15: DSP MODE: Use this control to select one of the 16 built-in digital effects. The effects available are list-
ed on page 3 of this manual.
16: INSERT: Use this jack to connect an external effects device to the amplifier. Use a stereo 1/4” male Y
connector: ring = send, tip = return, sleeve = ground. (Refer to the illustration at the bottom of page 5.)
17: EXTERNAL SPEAKER: Use this jack to connect the amplifier to an external speaker. This jack is wired
in series with the internal speaker, which remains active even when an external speaker is connected.
18: ON LED: This LED will illuminate when power is applied to the amplifier.
19: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the
switch depressed).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
The Electronic Tuner:
20
20. ELECTRONIC TUNER (top panel): The electronic tuner is active whenever the amplifier is turned on,
providing constant, “real-time” tuning. The bottom row of LEDs indicate which note (string) is being tuned.
The top row of LEDs provides directional queues to facilitate quick and precise tuning of your instrument.
The indicated note (string) is properly tuned when only the center LED is illuminated.
The Rear Panel (not shown):
21: AC LINE CORD: This grounded power cord is to be plugged into a grounded power outlet, wired
to current electrical codes and compatible with the voltage, power, and frequency requirements stated
on the rear panel. Do not attempt to defeat the safety ground connection.
21: FUSE: The fuse protects the amplifier from damages caused by a faulty AC power source and/or
other problems. If the fuse opens, replace it ONLY with the same size and type. If fuses continue to fail,
check the AC source – if the source is okay, contact your Crate dealer for service information.
22: CHANNEL SELECT / GAIN FOOTSWITCH JACK: Use this jack to connect the stereo 1/4” plug of
the supplied three-button footswitch for remote control of channel selection and gain selection.
23: REVERB FOOTSWITCH JACK: Use this jack to connect the mono 1/4” plug of the supplied three-
button footswitch for remote control of DSP on and off.
CONNECTING TO THE INSERT JACK:
Stereo-to-mono Y-cord:
Y-adapter and 2 cables:
TIP
RING
SLEEVE
RETURN
TIP
to Insert
jack
to Insert
jack
SEND
RING
The Insert jack (#16) allows
you to patch an external
GROUND
SLEEVE
(STP201, 3'
STP202, 6'
STP203, 9')
effects device into the amplifier
prior to its power amp stage.
Use Crate’s STP201, STP202
or STP203 stereo-to-mono Y
cord or an adapter such as
Crate’s YPP117 and two 1/4”
mono signal cables to connect
the effect as shown to the
immediate right.
(YPP117)
(1/4"-TO-1/4"
MONO SHIELDED
CABLES)
to
to
effect
"IN"
to
to
effect
"IN"
effect
"OUT"
jack
effect
"OUT"
jack
jack
jack
External Effect
External Effect
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
Suggested Settings:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
System Block Diagram:
TUNER
A BC D EF G
CLEAN
CHANNEL
CHANNEL
SELECT
BUFFER
INPUT
LEVEL LOW MID HIGH
FLEX WAVE
STAGE
EQ
OVERDRIVE
CHANNEL
SHAPE
ACTIVE
GAIN
LOW HIGH LEVEL
GAIN
SHAPE
MIX
AMP
DSP
INSERT
LEVEL
POWER
AMP
SPEAKER
MODE
DAMPING
CIRCUIT
EXT.
SPEAKER
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GFX-120T/212T Guitar Amps with DSP & ChannelTracking
GFX-120/212T TECHNICAL SPECIFICATIONS:
Output Power Rating
120W RMS @ 5% THD, 4Ω, 120 VAC
Speaker Size and Rating
GFX-120T
GFX-212T
(1) Custom Design 12”, 4Ω
(2) Custom Design 12”, 8Ω
Input Impedance
Total System Gain
470kΩ
Overdrive Ch
Clean Ch
Gain 1: 88dB, all controls @10; Gain 2: 110dB
58dB, all controls @10
Maximum Input Signal Accepted
7 volts peak-to-peak
Overdrive Channel
Low Control
Shape Control
High Control
11dB range @ 80Hz
Proprietary Circuit
10dB range @10kHz
Clean Channel
Low Control
Mid Control
High Control
22dB range @ 80Hz
14dB range @ 600Hz
28dB range @ 10kHz
Power Requirements
Size and Weight
120 VAC, 60Hz, 95VA; 100/115VAC, 50/60Hz, 95VA;
100/115VAC, 50/60Hz, 95VA
GFX-120T
GFX-212T
17-1/2” H x 19-1/4” W x 9-3/4” D, 44 lbs.
21” H x 26-1/2” W x 11” D, 50 lbs.
The GFX-120T/212T is covered with a durable charcoal gray Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
Declaration Of Conformity
#34, Effective 01-01-2001
Manufacturer’s Name:
Production Facility:
Production Facility:
Shipping Facility:
Office Facility:
SLM Electronics
11880 Borman Drive, St. Louis, MO 63146, USA
700 Hwy 202 W, Yellville, AR 72687, USA
1400 Ferguson Ave., St. Louis, MO 63133, USA
1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type:
Audio Amplifier
Complies with Standards:
LVD:
92/31/EEC, 93/68/EEC, & 73/23/EWG
EN60065
EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
Safety:
EMC:
Supplementary information provided by your local Sales & Services Office or:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175
@2001 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-476-06 • 013003
Download from Www.Somanuals.com. All Manuals Search And Download.
|